Push Pull Series

Digital Push Pull Tester (Manual Operated) PPT - 50

Product Details:
  • Dimensions: 550 x 110 x 410 mm (21.6 x 4.3 x 16.1 inches)
  • Operation Mode Standard: Standard displays the actual value in kgf
  • Operation Mode Peak: Peak displays the peak value in kgf Max
  • Weight: 15 kgs
  • Power Supply: AC-adapter 100 - 240 VAC (50/60 Hz)
  • Drive: Manual pulling with lever
  • PullOff Speed: Manually
  • Clamping device: Common standard
  • Model: PPT-50
  • Measuring Range: Upto 50kg by resolution of 10 grams
  • Display: LCD, 2 LINE DISPLAY

Overview

This instrument is designed for measuring tensile strength of soldered or solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components in accordance with all the standards.

Test samples are inserted into the receptacle Standard adaptor which has 12 different slot widths (from 0.5 mm to 6.0 mm) covering all the prevalent wire strengths and terminal types. The traction force is applied by an easy gliding lever system which simultaneously clamps the wire and creates a consistent pull with minimal effort.

The traction force is collected at an accuracy of ±0.5 % and is shown on the display at a resolution of 10 grams. The peak value at which the cable is torn will be automatically shown in the display

Features of PPT-50
  • High accuracy and reproducibility
  • Solid construction for high durability
  • Less Weight
  • Simple operation with automatic peak value recording

Digital Push Pull Tester (Motorised) PPT - 100

Product Details:
  • Model: PPT-100
  • Memory: Peak value (Peak)
  • PullOff Speed: 25 / 50 / 75 / 100 mm/min (adjustable)
  • Drive: Electric drive for wire pulling
  • Power Supply: 230 VAC (50/60 Hz)
  • Weight: 30 kgs
  • Dimensions: 350 x 300 x 710 mm (13.7 x 11.8 x 27.9 inches)
  • Measuring Range: Upto 100kg by resolution of 10 grams
  • Display: LCD, 4 LINE DISPLAY
  • Operation Mode Standard: Standard displays the actual value in kgf
  • Operation Mode Peak: Peak displays the peak value in kgf Max
  • Operation Mode Admissible: Admissible Overload 120 % (F.S.) / auto power-off
  • Cable Thickness: Slot Widths Of Testing Adapter 0,5 / 0,8 / 1,0 / 1,3 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 / 4,0 / 5,0 / 6,0
  • Accuracy: +/- 0.5 Degree C
  • Temperature Range: Operation 10 - 40o C Storage 0 - 60o C (rF upto 80%)

Overview

The solid instrument is designed for quality control applications in laboratories and in production facilities. This PPT-100 instrument is designed for measuring tensile strength of soldered or solder-free cable joints with end sleeves, pins; solder pins or similar wire terminal components in accordance with all standards.

Depending on the standard the constant pull speed is adjustable. Test samples are inserted into the receptacle adaptor which has 12 different slot widths (from 0.5 mm to 6.0 mm) covering all the prevalent wire diameter and terminal types. Its simple operation allows the users to acquire reliable and reproducible test results.

The user inserts the wire terminal into the receptacle adapter, and the open wire end into the combined clamp pull device. The wire will be fixed into position, and then constantly pulled

Features of PPT-100
  • Simple operation with automatic peak value record
  • High accuracy and reproducibility
  • Solid construction for high durability
  • Motorized pull with variable pull speed
  • USB 2.0 interface
  • Adaptor for all prevalent terminal types

Digital Push Pull Tester (Motorised) PPT-100plus)

Product Details:
  • Dimensions: 350 x 300 x 710 mm (13.7 x 11.8 x 27.9 inches)
  • Operation Mode Peak: Peak displays the peak value in kgf Max
  • Operation Mode Admissible: Admissible Overload 120 % (F.S.) / auto power-off
  • Cable Thickness: Slot Widths Of Testing Adapter 0,5 / 0,8 / 1,0 / 1,3 / 1,5 / 2,0 / 2,5 / 3,0 / 3,5 / 4,0 / 5,0 / 6,0
  • Accuracy: +/- 0.5 Degree C
  • Temperature Range: Operation 10 - 40oC Storage 0 - 60o C (rF less than 80%)
  • Memory: Peak value (Peak)
  • Interface: Capability RS-232
  • Weight: 30 kgs
  • Power Supply: 230 VAC (50/60 Hz)
  • Drive: Electric drive for wire pulling
  • PullOff Speed: 25 / 50 / 75 / 100 mm/min (adjustable)
  • Model: PPT-100+
  • Measuring Range: Upto 100kg by resolution of 10 grams
  • Display: LCD, 4 LINE DISPLAY
  • Operation Mode Standard: Standard displays the actual value in kgf

Overview

The solid instrument is designed for quality control applications in laboratories and in production facilities. This PPT-100+ instrument is designed for measuring tensile strength of soldered or solder-free cable joints with end sleeves, pins; solder pins or similar wire terminal components in accordance with all standards.

Depending on the standard the constant pull speed is adjustable. Test samples are inserted into the receptacle adaptor which has 12 different slot widths (from 0.5 mm to 6.0 mm) covering all the prevalent wire diameter and terminal types. Its simple operation allows the users to acquire reliable and reproducible test results.

The user inserts the wire terminal into the receptacle adapter, and the open wire end into the combined clamp pull device. The wire will be fixed into position, and then constantly pulled.

Features of PPT-100+
  • Simple operation with automatic peak value record
  • High accuracy and reproducibility
  • Solid construction for high durability
  • Motorized pull with variable pull speed
  • USB 2.0 interface
  • Adaptor for all prevalent terminal types

Digital Push Pull Tester (PPT 300)

Product Details:
  • Model: PPT-300
  • Motor: 230 V AC single Phase
  • Weight Approx: 70 kgs (154.32 lbs)
  • Dimensions: 600 x 400 x 1300 mm (23.62 x 15.74 x 51.18 inches)
  • Range: 0 to 300 Kg (661 lbs)
  • Measuring Units: In Kgs and Newtons
  • Display: LCD 6-Digit
  • Applied force accuracy: +/-0.2%
  • Operating Temperature: 0 to 50 degree C
  • Maximum Stroke: 600 mm
  • Pulling Speed: Variable from 25 mm to 100mm per minute
  • Pulling Modes: Pull + Break, Normal pull test until Break-out

Overview

Sai Paradise manufactured push pull tester is a sophisticated dual-range, motorized, and stand-top unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wide range of wires than single-range pull test devices.

Pull test values are critical parameters for quality control and assurance. This versatile PPT-300 model machine has two measuring ranges. One is, it individually calibrates enabling the use of its 10 kg scale for small wires. Secondly, it easily switches to its 100kgs scale for larger wires. This dual range capability ensures the highest accuracy for the widest range of applications. Hand operated pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate.

The PPT-300 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in Newton’s and Kilograms. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request

Features of PPT-300
  • Simple LCD display for easy programming
  • Digital pull force readout speed-controlled motor
  • Consistent pull rates throughout the measuring range

Digital Push Pull Tester (PPT-1000/2000)

Product Details:
  • Model: PPT-1000 / 2000
  • Motor: 230 V AC single Phase
  • Weight: Approx 200 kgs (440.92 lbs)
  • Dimensions: 600 x 600 x 1300 mm (23.62 x 23.62 x 51.18 inches)
  • Measuring Range: 0 to 1000 Kg (2204.62 lbs) / 2000 kgs (4409.24 lbs)
  • Measuring Units: Kilograms and Newtons
  • Display: LCD 6-Digit
  • Applied force accuracy: +/-0.2%
  • Operating Temperature: 0 to 50 degree C
  • Maximum Stroke: 600 mm
  • Pulling Speed: Variable from 25 mm to 100mm per minute
  • Pulling Modes: Pull + Break, Normal pull test until Break-out

Overview

Sai Paradise manufactured push pull tester is a sophisticated dual-range, motorized, and stand-top unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wide range of wires than single-range pull test devices.

Pull test values are critical parameters for quality control and assurance. This versatile PPT-1000 / 2000 model machine has two measuring ranges. It individually calibrates enabling the use of its 10 kg scale for small wires; while easily switching to its 100kgs scale for larger wires. This dual range capability ensures the highest accuracy for the widest range of applications. Hand operated pull test devices are bound to give inconsistent data depending on the operator or pull rate. Several standards specify that a test device must pull with a consistent rate.

The PPT-1000 / 2000 comes with a speed-controlled motor, which ensures consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in Kilograms and Newtons. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders are available with us. They will be supplied upon request

Features of PPT-1000 / 2000
  • Simple LCD display for easy programming
  • Digital pull force readout speed-controlled motor
  • Consistent pull rates throughout the measuring range

Looking for Push Pull Series ?
© Sai Paradise Machine Tools
Desktop Site Back to top