Cut & Stripping Series

Standard Cable Cutting And Stripping Machine(Cutstrip-999)

Product Details:
  • Wire Size Range: 0.2 - 3.0 mm2 (12 AWG)
  • Maximum Cable Outer Dia: 4.0 mm (0.15 inch)
  • Wire Length: 10.0 mm to 1,00,000.0 mm (0.39 to 3937 inches)
  • Stripping Length Increments: 0.1 mm (0.003 inch)
  • Stripping Length Left Side: 30 mm (1.18 inch)
  • Stripping Length Right Side: 30 mm (1.18 inch)

Overview

The powerful Cut-Strip-999 processes round cables upto 4 mm outer dia. And it strips both sides upto 30 mm. It has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 100 wires with all the processing parameters. This Cut-Strip-999 is designed in micro-processed based with hybrid stepper motors and HMI

Features:
  • Quick change guide tubes and blades
  • Simple operation with keypad
  • User-friendly operation
  • Quick programming
  • Mid-strip facility available (optional)
Advantages
  • Stripping lengths – Partial strip
  • Stripping lengths - Full strip
  • Can strip single core as well as small multi-core cables
  • Mid-strip facility for small cables (optional)
  • Inch mode option to set the blades as per cables
  • Step run option to trace the problem if machine malfunctions
  • Less Wastage
  • Low Noise
  • Counter Option
  • No wire signal with machine stop option
  • Auto start delay facility to run in continuous production
Details:

Cycle Time:Approx 1 sec
Power Supply:230 to 240V (50/60 Hz) (optional 110V)
Dimensions (L x W x H):425 x 320 x 325 mm (16.7 x 12.5 x12.7 inches)
Net Weight:30 kgs
Running Options:Step mode, Test, Single and Run mode
Feed Rate:10 to 100 % (500 mm to 1000 mm) (19.6 x 39.37 inches)
Blades:HSS / Carbide
Noise Level:Less than < 70 db


Productivity Chart of CUT-STRIP-999
WIRE SIZEDESCRIPTIONSQTY / HOUR
0.5 to 1.0 Sq mm (2 wires)Only Cutting12000
One Side Stripping7000
Both Side Stripping5000
1.5 to 3.0 Sq mm (1 wire)Only Cutting6000
One Side Stripping4500
Both Side Stripping3000

Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.

Universal Cutting & Stripping Machine (Uni-Strip 999)

Product Details:
  • Wire Size Range: 0.3 - 8.0 mm2
  • Maximum Cable Outer Dia: 8.0 mm (0.31 inch)
  • Wire Length: 70.0 mm to 1,00,000.0 mm (2.7 to 3937 inches)
  • Stripping Length Increments: Full Strip: 0.1 mm (0.003 inch)
  • Stripping Length Left Side: 30 mm / 45 mm (1.18 inch / 1.77) for multi-core
  • Stripping Length Right Side: 30 mm / 300 mm (1.18 inch / 11.8) for multi-core

Overview

The powerful Unistrip-999 processes round cables upto 8 mm outer dia. And processes 2 core, 3 core flat and round cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999 has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999 is designed in PLC based with servo motors and HMI

Features:
  • Quick change guide tubes and blades
  • Simple operation of HMI (TFT Touch Screen)
  • User-friendly operation
  • Quick programming
  • Mid-strip facility available (optional)
Advantages
  • Stripping lengths – Partial strip
  • Stripping lengths - Full strip
  • Can strip single core as well as multi-core cables
  • Mid-strip facility for small cables
  • Inch mode option to set the blades as per cables
  • Step run option to trace the problem if machine malfunctions
  • Less Wastage
  • Low Noise
  • Counter Option
  • Foot Pedal operation for operator convenience
  • No wire signal with machine stop option
  • Auto start delay facility to run in continuous production
Details:

Cycle Time:Approx 1 sec
Power Supply:230 to 240V (50/60 Hz) (optional 110V)
Power requirement:1.2 KW
Dimensions (L x W x H):550 x 400 x 430 mm (21.6 x 15.7 x16.9 inches)
Net Weight:45 kgs
Running Options:Step mode, Test, Single and Run mode
Feed Rate:10 to 100 % (500 mm to 1500 mm) (19.6 to 59.0 inches)
Blades:HSS / Carbide


PRODUCTIVITY CHART OF UNISTRIP-999
WIRE SIZEDESCRIPTIONSQTY / HOUR
0.5 to 1.0 sq mm (3 wires)Both Side Stripping10000
1.5 to 2.5 sq mm (2 wires)Both Side Stripping6000
4.0 to 8.0 sq mm (1 wire)Both Side Stripping3000
2 core and 3 core cutting & strippingBoth Side Stripping1000 (At 2 meters length)

Heavy Duty Cutting & Stripping Machine (Uni-Strip 999plus)

Product Details:
  • Wire Size Range: 0.5 - 16.0 mm2
  • Maximum Cable Outer Dia: 10.0 mm (0.39 inch)
  • Wire Length: 70.0 mm to 1,00,000.0 mm (2.7 to 3937 inches)
  • Stripping Length Increments: Full Strip: 0.1 mm (0.003 inch)
  • Stripping Length Left Side: 30 mm / 45 mm (1.18 inch / 1.77) for multi-core
  • Stripping Length Right Side: 30 mm / 300 mm (1.18 inch / 11.8) for multi-core

Overview

The powerful Unistrip-999+ processes round cables upto 8 mm outer dia. And processes 2 core flat cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999+ has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999+ is designed in PLC based with servo motors and HMI

Features:
  • Quick change guide tubes and blades
  • Simple operation of HMI (TFT Touch Screen)
  • User-friendly operation
  • Quick programming
  • Mid-strip facility available (optional)
Advantages
  • Stripping lengths – Partial strip
  • Stripping lengths - Full strip
  • Can strip single core as well as multi-core cables
  • Mid-strip facility for small cables
  • Inch mode option to set the blades as per cables
  • Step run option to trace the problem if machine malfunctions
  • Less Wastage
  • Low Noise
  • Counter Option
  • Foot Pedal operation for operator convenience
  • No wire signal with machine stop option
  • Auto start delay facility to run in continuous production

Cycle Time:Approx 1 sec
Power Supply:230 to 240V (50/60 Hz) (optional 110V)
Power requirement:1.2 KW
Dimensions (L x W x H):550 x 400 x 430 mm (21.6 x 15.7 x16.9 inches)
Net Weight:45 kgs to 50kgs
Running Options:Step mode, Test, Single and Run mode
Feed Rate:10 to 100 % (500 mm to 1500 mm) (19.6 to 59.0 inches)
Blades:HSS / Carbide


PRODUCTIVITY CHART OF UNISTRIP-999+
WIRE SIZEDESCRIPTIONSQTY / HOUR
0.5 to 1.0 sq mm (3 wires)Both Side Stripping10000
1.5 to 2.5 sq mm (2 wires)Both Side Stripping6000
4.0 to 8.0 sq mm (1 wire)Both Side Stripping3000
2 core and 3 core cutting & strippingBoth Side Stripping1000 (At 2 meters length)

Note: Standard Length 100 mm unless specified. Quantity might differ as per wire quality.

Battery Cable Cutting & Stripping Machine (Mega-Strip 999)

Product Details:
  • Length Measuring System: By means of encoder on transport unit
  • Operating Parameters Setting: 7inch TFT touch screen operation
  • Function Display: Alphanumerical Digital Display
  • Electrical Power Supply: 230 v single phase +/-5% , 50 / 60 Hz
  • Connecting Load: 5 KW
  • Pneumatic Power Supply: Minimum 3 to 8 bar maximum ( 50 to 116 PSI)

Overview

This is a fully automatic cable cutting and stripping machine. It handles and processes uni-core cables and multi-core cables of external diameters from 1mm to upto 15mm maximum. The insulation materials that this Megastrip-999 handles are of PVC, Extruded Teflon, Silicon and many other types of materials. This machine can be operated by means of 7" TFT touch screen. Its mechanical system consisting of 5 servo motors and 2 micro hybrid stepper motor drives and PLC based controller

Features of Megastrip-999
  • Quick change guide tubes and blades
  • Simple operation of HMI (TFT Touch Screen)
  • User-friendly operation
  • Quick programming
  • Mid-strip facility available (optional)
Details:

Dimensions (L x W x H):550 x 800 x 1400 mm (21.6 x 31.4 x55.1 inches)
Machine Weight:330 kgs
Cutting Length:60 mm (2.36") to 100 meters (3937") (Step of 0.1 mm)
Tolerance:±0.2%
Strip Length Side 1 :75 mm (2.95 inches) Maximum
Strip Length Side 2 :250 mm (9.84 inches) Maximum (Depends on the cable)
Quantity Setting :1 no. to 9999 nos.
Piece Step :1 Cable
Feed Speed :500 mm per sec maximum

Productivity Chart of Megastrip-999
WIRE SIZEDESCRIPTIONSQTY / HOUR
4.0 to 16.0 sq mm (1 wires)Both Side Stripping2000
25 to 50 sq mm (1 wires)Both Side Stripping1200
50 to 95 sq mm (1 wire)Both Side Stripping900
2 core and 3 core cutting & strippingBoth Side Stripping700 (At 2 meters length)
Looking for Cut & Stripping Series ?
© Sai Paradise Machine Tools
Desktop Site Back to top