Regular Model Applicators

Product Details:
  • Disk Resolution: 0.1 mm per step in steps of 8 divisions
  • Dimensions: 70 x 160.5 x 125 mm
  • Power Supply: AC220V 50Hz
  • Weight: 5.5 kgs
  • Feeding System: Mechanical / Pneumatic
  • Wire Section: 10mm2 Maximum


Our regular model mechanical and pneumatic feed applicator crimps in chain type (Reel form) terminals with wires of different cross sections. Its newly developed having great accessibility and easy adjustments; and the replacement of the spares are very much easy.

Two different feeding cams are supplied - for manual (terminal already on the anvil) or automatic (terminal not yet on the anvil) set up. The applicators can be ordered either in side-feed or end-feed or mid-joint and individual or pneumatic based on the terminal manufacturing design and crimp height disk will vary to adjust the crimp height (0.1mm resolution, 1.0 mm range).

These applicators also supplied with different fixing base plate and holder to fix in different shut-height, Every Applicator will supplied with complete Data Sheet and all the parameters & adjustments used during the final test, together with an exploded view of the tool and the part number of each component; the same data can be used to order the spares. Upon request, a Capability Test - which includes measurement of crimping height & pull-out force and a cross section micrograph - can be supplied for the desired wire section

Other details:
Shut Height:158.0 mm (6.22 inches)
Stroke:40 / 30mm
Terminal Pitch:< 27 to 40 mm
Terminal Thickness:< 0.5 to 1.2mm

Unique Model Applicators

Product Details:
  • Size: 170 x 110 x 160 mm (6.6 x 4.3 x 6.2 inches)
  • Weight incl Packing: 7.0 kg
  • Weight: 4,8 kg
  • Maximum: 2.0 mm (0.07 inch)
  • Increments: 0.2 mm (0.007 inch)
  • Cross Sections: Upto 6 mm2 in mechanical and upto 16 mm2 pneumatic
  • Material Thickness: Upto 1.5 mm (0.059 inch)


The unique model applicator with quick change system is made for crimping transversely chain form, individual terminals on wires with cross sections of wires. This applicator is designed with an indexed rotary head for reproducible, independent crimp height adjustment of both the wire and insulation.

Range of Application

Sai paradise unique crimping applicators are used in the series production of the cable processing industry.

Examples of Use

Crimping applicators to connect wires and terminals in multiple applications made for bench top crimp machines and also as equipment for semi or fully automated systems.

Product Combination Possibilities

The applicator can be used in SAI PARADISE, KOMAX TYCO AND SCHLUNIGER crimp machines and if any other designed machines also accordingly we can change fixing plate and holders

Other details

Terminal Pitch:Upto 28 mm (1.10 inch) for mechanical and upto 50mm (1.96 inch) for pneumatic
Width of Carrier Strip incl Belt:Upto 6 mm (0.23 inch)
Terminal Feeding:Side feed, end feed, mid joint, individual and pneumatic
Feeding:Mechanical / Pneumatic

Pillar Set Applicator

Product Details:
  • Dimensions: 160 x 200 x 170 mm (6.3 x 7.9 x 6.7 inches)
  • Weight: 8.6 kgs (19 lbs)
  • Power Input: 230 volts (50/60 Hz)
  • Feeding System: Manual
  • Wire Section: Maximum 95mm2
  • Terminal Thickness: Above 1.5 mm (0.06 inches)
  • Terminal Pitch: Loose
  • Crimping Height: 136 /158 / 190 /212 mm (5.3 / 6.2 / 7.5 / 8.3 inches)
  • Stroke: 40 /50 / 60 mm (1.5 / 1.9 / 2.4 inches)


Pillar set crimping die for big loose terminals with thickness above 2.5mm and wire section up to 95mm². The terminal is loaded by means of a manually operated slide, fitted with a sensor that allows the press to cycle only when the slide has reached its stroke’s end. All the wearing parts can be replaced without removing the applicator from the press. It can be fitted to any crimping press having a crimping height (Measured from the die mounting plate to the press coupling when at Bottom Dead Center) of 158 mm, 136 mm, 212 mm and others

Looking for Applicators ?
© Sai Paradise Machine Tools
Desktop Site Back to top